[Rtk-users] Errors occurred during configuring RTK examples: RTKTargets.cmake is missing

[Daniel lee]

 Dear Andreas

I tried it again with another PC and It worked.

There was some problem with GPU, I think.

Thank you for comments.

Best regards
K. Y. Daniel Lee


2018-02-24 21:06 GMT+09:00 Daniel lee <lkylove2323 at gmail.com>:

> Dear Andreas
>
> Thank you for kind explanation.
>
> I will try to build it again from beginning
>
> Best regards
> K. Y. Daniel Lee
>
> 2018. 2. 24. 오전 8:47에 "Andreas Gravgaard Andersen" <andreasg at phys.au.dk>님이
> 작성:
>
> Hi again,
>
> First:
> "CUDA_SDK_ROOT_DIR-NOTFOUND"
> "CUDA_nvcuvenc_LIBRARY-NOTFOUND"
> Doesn't matter, i.e. these are not necessary for cmake to find the
> necessary files.
>
> Second:
> If rtkcuda.lib is not in [your biuld directory]/bin/[Debug or Release]/
> it would mean something went wrong - probably in your configuration.
> Make sure to enable CUDA in the RTK CMake config, i.e. tick "RTK_USE_CUDA".
> Also, build RTK in the same configuration (release, debug or whatever) as
> the project that depends on it (otherwise visual studio might complain)
>
> If this does not solve your problem try to build the rtkcuda project
> (when the entire solution is open in Visual studio) by itself and watch the
> output for anything suspicious.
>
> Beset regards
> Andreas
>
> __________________________________
>
> Andreas Gravgaard Andersen
>
> Department of Oncology,
>
> Aarhus University Hospital
>
> Nørrebrogade 44,
> <https://maps.google.com/?q=N%C3%B8rrebrogade+44,+8000,+Aarhus+C&entry=gmail&source=g>
>
> 8000, Aarhus C
> <https://maps.google.com/?q=N%C3%B8rrebrogade+44,+8000,+Aarhus+C&entry=gmail&source=g>
>
> Mail:     andreasg at phys.au.dk
>
> Cell:      +45 3165 8140
>
>
>
> On 24 February 2018 at 00:26, Daniel lee <lkylove2323 at gmail.com> wrote:
>
>> Dear Andersen
>>
>> There is no rtkcuda.lib in my RTK directory.
>>
>> Could you give me some tips to solve it?
>>
>> I will reinstall CUDA and build ITK, RTK again though.
>>
>> Thank you for your kind attention.
>>
>> Sincerely,
>>
>> K. Y. Daniel
>>
>> 2018-02-24 8:01 GMT+09:00 Daniel lee <lkylove2323 at gmail.com>:
>>
>>> Thanks for your reply
>>>
>>> I have already configured, generated and built ITK and RTK. (without any
>>> error)
>>>
>>> and I tried to do cmake inside of RTK directory that I made.
>>>
>>> Now I doubt that RTK is built properly or even CUDA 8.0.
>>>
>>> I tried to do all things again composedly, I get some option is not found
>>>
>>> CUDA_SDK_ROOT_DIR-NOTFOUND
>>> CUDA_nvcuvenc_LIBRARY-NOTFOUND
>>>
>>> If it is possible, It will be very helpful for me to get screen shot of
>>> proper cmake options from others
>>>
>>>
>>> -Configuration
>>> RTK-1.4.0
>>> ITK4.13.0
>>> MSVS2015 64bit
>>>
>>> My basic question is still open to help.
>>>
>>> Best regards,
>>>
>>> K.Y.Daniel Lee
>>>
>>>
>>> 2018-02-24 5:48 GMT+09:00 Andreas Gravgaard Andersen <
>>> andreasg at phys.au.dk>:
>>>
>>>> Hi Daniel
>>>>
>>>> I'm not exactly sure what you attempted, but it could look like you
>>>> were trying to make CMake configure the path "E:/Source/RTK-1.4.0(ITK4.13.0)/examples"
>>>> *alone*.
>>>> In which case: You will need to configure, generate and build ITK and
>>>> RTK first.
>>>> Follow the instructions on http://wiki.openrtk.org/ind
>>>> ex.php/RTK_wiki_help
>>>> Start at "Step 0" and see if you have missed anything on the way.
>>>>
>>>> Best regards
>>>> Andreas
>>>>
>>>>
>>>> __________________________________
>>>>
>>>> Andreas Gravgaard Andersen
>>>>
>>>> Department of Oncology,
>>>>
>>>> Aarhus University Hospital
>>>>
>>>> Nørrebrogade 44,
>>>> <https://maps.google.com/?q=N%C3%B8rrebrogade+44,+8000,+Aarhus+C&entry=gmail&source=g>
>>>>
>>>> 8000, Aarhus C
>>>> <https://maps.google.com/?q=N%C3%B8rrebrogade+44,+8000,+Aarhus+C&entry=gmail&source=g>
>>>>
>>>> Mail:     andreasg at phys.au.dk
>>>>
>>>> Cell:      +45 3165 8140
>>>>
>>>>
>>>>
>>>> On 23 February 2018 at 16:08, Daniel lee <lkylove2323 at gmail.com> wrote:
>>>>
>>>>> Hi, I`m almost newbie for RTK.
>>>>>
>>>>>
>>>>> When I try to configure example (e.g. HelloWorld or
>>>>> FirstReconstruction), there is an error message like following.
>>>>>
>>>>> [image: 본문 이미지 1]
>>>>>
>>>>> I don`t have the file, RTKTargets.cmake.
>>>>>
>>>>>
>>>>> I tried with RTK 1.4.0, ITK 4.13.0, VS2015
>>>>>
>>>>>
>>>>> I`m just looking for someone who will help me to make it.
>>>>>
>>>>>
>>>>> Sincerely
>>>>>
>>>>>
>>>>> K.Y. Daniel Lee
>>>>>
>>>>>
>>>>> _______________________________________________
>>>>> Rtk-users mailing list
>>>>> Rtk-users at public.kitware.com
>>>>> https://public.kitware.com/mailman/listinfo/rtk-users
>>>>>
>>>>>
>>>>
>>>
>>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.creatis.insa-lyon.fr/pipermail/rtk-users/attachments/20180224/ffeb769a/attachment.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image.png
Type: image/png
Size: 9235 bytes
Desc: not available
URL: <http://www.creatis.insa-lyon.fr/pipermail/rtk-users/attachments/20180224/ffeb769a/attachment.png>